3angles, Inc. © ALL RIGHTS RESERVED
Advanced Robotic Generator Inspection System (ARGIS)
Traditionally, a generator inspection requires the rotor to be removed from the stator. Not only could this possibly damage the generator during the dissassembly process, but it is also adds additional time for the outage. The Advanced Robotic Generator Inspection System (ARGIS) developed by DEKRA makes it possible, to perform the inspections without removing the rotor. The ARGIS system is a proven concept for in-situ mechanical inspections which can be performed on many type of generators.
A chain containing motor drives and a docking station for the Generator Inspection Vehicle (GIV) is mounted around one of the retaining rings of the generator. The chain is positioned accurately in front of each slot so that the GIV can be inserted into a gap as small as 0.67 inch (17 mm). The GIV then moves to the other end of the stator core and back performing the following inspections:
The GIV is equipped with 4 cameras: a forward viewing camera is used for general inspection of the stator teeth and wedges, another camera inspects the rotor body and cooling slots, and 2 more cameras inspect the stator cooling slots.
Wedge tightness testing
The GIV is deployed with a stator wedge tap tester that determines the wedge tightness based on spectral analysis of the sound response.
Low ﬂux leakage test
Electromagnetic core ﬂux leakage testing (ELCID or equivalent) is another inspection that can be performed. The step irons can be inspected as well as an option with a separate module.
In combination with the automated inspection of generator retaining rings system ARGIS adds a powerful inspection tool for in-situ inspections of generators.
3angles Non Destructive Testing